3 Production Sites in Guangdong, China · 10,000+ m² Slabs in Ready Stock · Factory-Direct Export

Statuario Quartz Countertop Slab HF672

Key Specifications

Product Code

HF672

Material

Engineered quartz — 93% natural quartz

Color / Pattern

Very bright white

Finish

Polished, Honed

Slab Size

3200 × 1600 mm or custom

Thickness

15 / 20 / 25 / 30 mm; 20 mm is the standard export thickness

MOQ

1 slab from stock (check stock with us); one container when made to order

Lead Time

Stock colours 7–15 days · made to order 30 days

Every cost to your door, if you need it — slabs, freight, duties and delivery.

See every slab we have in stock now, ready to ship.

Sample and courier both free, subject to our approval.

Full specifications and test data, PDF.

Factory-direct

3 production sites in Guangdong, 1,000,000 m²/yr

10,000+ m² in stock

30+ popular colors on the rack · subscribe to the stock list

Stock slabs from 1 slab

Made-to-order from one container, up to 5 designs mixed

7–15-day lead time

Stock slabs · pressed to order about 30 days

About this slab

About Statuario Quartz Countertop Slab HF672

HF672 is a slab for statuario quartz countertops: sharp-edged grey lines, 1 to 6 mm, drawn sparsely across a very bright white with large clean fields between them. Statuario is defined by that contrast — a whiter ground than Calacatta and fewer, cleaner lines — and this drawing holds it without drifting towards the busier Calacatta reading.

Statuario Quartz Countertops: Contrast Without Clutter

For statuario quartz countertops, the very white ground and sparse grey lines suit large quartz kitchen countertops where one strong vein can run the length of the top; it is one of our Calacatta quartz slabs. The marble this design follows is still quarried in Italy; the Natural Stone Institute’s case study of an Italian marble cathedral shows Statuario in a large installation.

  • Sharp lines — the vein edges are defined rather than diffused, which is what gives Statuario its graphic quality and what separates it from a soft Carrara.
  • Sparse spacing — lines fall 400–800 mm apart, so a small vanity top may carry only one vein — check the layout on pieces under a metre.
  • Whiter ground — the base is cooler and brighter than the Calacatta designs here, which is the first thing buyers notice when statuario quartz countertops are compared side by side with them.
  • Book-matching — sparse sharp veining is the easiest drawing in the range to mirror, so a two-slab feature wall gives a clean symmetrical panel 3200 mm wide.
  • Silica-free — available as a crystalline-silica-free slab on the same drawing for markets that now require it.
Applications

Where this slab is used

Kitchen island and countertop in Statuario HF672 quartz — application example

Kitchen countertops & islands

A statuario quartz slab covers a 3 m island with two or three sharp veins crossing the top; at 3200 × 1600 mm the composition can be chosen before the first cut.

A statuario quartz slab makes the layout decision unavoidable — get it wrong and one end of the island is blank while the other is crowded.

Full-height backsplash and wall cladding in Statuario HF672 quartz — application example

Backsplash & wall cladding

A single 20 mm panel taken to full height behind a bath or a console; Statuario's sparse lines survive being cropped to a 900 mm width where a busy design would turn into noise.

Narrow vertical panels are where most veined stone fails, because cropping removes the space the pattern needs — sparse drawings are the exception.

Bathroom vanity top in Statuario HF672 quartz — application example

Vanity tops & hotel projects

A 1500 mm vanity cut so one vein crosses behind the basin and the rest stays clean white.

On a sparse design the single vein has to be placed deliberately, because there is no second chance elsewhere on the piece.

Bar and reception counter in Statuario HF672 quartz — application example

Bar & reception counters

Reception counters in 30 mm; the graphic contrast reads correctly at the two-metre viewing distance of a lobby.

High-contrast veining survives distance better than soft veining, which is why lobbies are specified in Statuario more often than Carrara.

Commercial floor tiled with Statuario HF672 quartz — application example

Flooring

Floor panels at 1600 × 800 mm in a polished finish; the high contrast between the white ground and the sharp grey lines survives the light levels of an interior floor.

Floors get a fraction of the light a worktop gets, and low-contrast veining goes invisible down there — contrast, not scale, is what to check before specifying a floor.

Dining table top in Statuario HF672 quartz — application example

Dining & coffee table tops

A 2400 × 1000 mm table with one vein running its full length, edges mitred to 40 mm.

A single vein down a long table is the most quoted detail in stone furniture, and it needs a full-length slab to achieve.

Performance

Built for countertops

Stain resistant

Non-porous surface; wine, coffee and oil wipe off without sealing.

Scratch resistant

Mohs 6–7 — as hard-wearing as granite for daily kitchen use.

Heat tolerant

Handles warm pots; use trivets above 150 °C.

Food safe & low maintenance

NSF-listed formula, cleans with soap and water.

FAQ

Questions buyers ask

How is Statuario quartz different from Calacatta quartz?

Statuario has a whiter ground and fewer, sharper veins than Calacatta. HF672 draws grey lines of 1 to 6 mm with defined edges, 400–800 mm apart, across a very bright white, while our Calacatta designs carry more veins with softer or warmer edges on a less bright base. Side by side, that cooler, brighter ground is the first difference buyers notice.

What design styles does Statuario Quartz HF672 suit?

HF672 is the gallery white for minimal, modern classic and luxury-contemporary rooms: handleless cabinetry in white, charcoal or deep green, polished chrome or blackened steel, and nothing competing on the walls. It is also right for a bathroom where a single vein is framed behind a freestanding bath. Avoid cutting it into small pieces, as a section may end up with no vein at all.

What is the minimum order for Statuario Quartz HF672?

One slab, if HF672 is in stock, which we check for you before quoting. For a pressed-to-order run, plan on one container, with up to five colours on board, and about 30 days. Cut work carries no minimum, so a single 30 mm reception counter can be ordered on its own, though freight on one piece is high.

Is the vein pattern the same on every HF672 slab?

Within a production batch, yes, and the sparse, sharp veining makes HF672 the easiest drawing in our range to mirror, so two slabs give a clean symmetrical feature wall 3200 mm wide. Ordering both from one batch keeps the shade identical; a later batch can differ slightly, so for a top-up we send a sample to check colour first.

Do you cut Statuario Quartz HF672 to size?

Yes. Send drawings and we cut finished countertops and vanity tops with cut-outs and edge profiles, ready in about 30 days. Because HF672 lines fall 400–800 mm apart, we check the layout on any piece under a metre; a 1500 mm vanity is cut so one vein crosses behind the basin and the rest stays clean white.

Get a Quote

Need this slab for a project?

Tell us quantity, thickness and destination port. Our export team replies within 24 hours with stock availability, price and loading plan.

Get a G-Stone Factory Quote

Tell us what you need — we reply within 24 hours

Stock availability, factory pricing, lead time and container loading advice, straight from our export team.

Free Sample

Request a free sample

Product code: HF672
Sample for: Statuario Quartz Countertop Slab HF672

Samples are free. For serious buyers, we can also cover the courier cost, subject to G-Stone’s approval. Tell us where to send it — we reply within 24 hours.

Thank you — we have your sample request and will reply within 24 hours.